ANCEL GD100 Combustible Gas Leak Detector Pen Alarm 50–10000ppm Methane Tester

ANCEL GD100 Combustible Gas Leak Detector Pen with Audible & Visual Alarm Portable Car Pipe Leak Emissions Gas Analyzers Tools

ANCEL GD100 Product Description

ANCEL GD100 Combustible Gas Leak Detector Pen with Buzzer Alarm Car Pipe Leak Diagnostic Tool Emissions Gas Analyzers Tools
✅Versatile Gas Detection: Capable of detecting a wide range of gases including natural gas, methane, propane, butane, iso-butane, LPG, ING, CNG, and other fuel gases or vapors.

✅Advanced Sensor Technology: Equipped with a planar semiconductor sensor for accurate and reliable detection.

✅Quick Bootup Time: Starts up in just 30 seconds, ensuring prompt readiness for use.

✅Wide Detection Range: Effective detection range from 50 to 1000ppm, suitable for various environments.

✅ Visual and Audible Alarms: Features 3-color LED visual indicators and a variable tone frequency buzzer for clear and immediate alerts.

✅Sensor Failure Indication: Includes a sensor failure indication (VS) to ensure the device is always functioning correctly.

✅Robust Operating Conditions: Operates effectively in temperatures from 0 to 50°C and humidity levels below 90%RH.

✅Reliable Power Source: Powered by two AA 1.5V batteries, ensuring long-lasting performance.

✅Ideal tools for pinpointing combustible gas leaks in residentialapplications to keep your family and property safe
✅Senor failure indication
✅Easy one key operation
✅Audible and visual alarm
✅Auto power off

To Operate Unit:
1. Open battery cover and insert two(2) AA batteries (with(+) side pointed towaras tip). The wand shortly sounds two times in case battery correctly installed.

2. Remove the red protective cap before turning on unit. Cap must be off for sensor to work properly.

3. Press and hold the white power button for two seconds to start a 25 second self-inspection, 4 LEDs light will blink in sequence. The detector is ready for use after beep sounds and LED(Yellow, Orange, Red) lights turn off and LED(Green/Red) lights on in green color.

4. Place the sensor tip of the wand along the connection point that you are testing. Be sure cap is off. If checking tor leaks on a gas pipe, be sure to move the sensor slowly along the pipe over joints&fittings. Caution must be taken when utilizing the wand outdoors or in the presence of winds or air flow. Wind direction, strength, leak size and dilution o1 detectable gases may interfere with proper readings or mask a potentially dangerous gas leak.

5. IF GAS IS DETECTED, an audible alarm will accompany a yellow, orange or red light: (LED Yellow, Orange, Red )

GREEN light illuminates-the detector is powered on and Air is safe

YELLOWlight illuminates and buzzer beeps -Small amount of gas detected

ORANGE light illuminates and buzzer beeps - Medium amount of gas detected

RED light illuminates and buzzer beeps-Significant amount of gas detected

WARNING! If red indicators light up, ventilate the area IMMEDIATELY and move to a safe location away from the residence. Then call your local gas utility company for assistance. After leak is repaired, repeat steps 2 through 4.

6.SENSOR FAILURE In case LED(Green/Red) turns to red color with continuous buzzer and LED(Yellow, Orange, Red )are all off during use, the sensor of detector fails is no longer working properly.
Stop using and replace the detector immediately.