Skip to product information

XTOOL D9EV Car Diagnostic tools Energy Vehicles For Tesla For BYD With Battery

SKU: Does not have
$4,990.99
Hurry up! Only 2 left
Product subtotal: $4,990.99
Proudly Australian
Technical Support
Easy Returns
Fast & Free Shipping
XTOOL D9EV Car Diagnostic tools Energy Vehicles For Tesla For BYD With Battery
XTOOL D9EV Car Diagnostic tools Energy Vehicles For Tesla For BYD With Battery
$4,990.99
D9EV is a professional EV smart diagnostic system. Equipped with a 9.7-inch high-performance long-lasting tablet. The system supports Bluetooth communication, DoIP protocol, and CAN-FD protocol. D9EV supports most EV models in the market, and all the software including APP, diagnostic software, and operating system support online updates. D9EV covers extensive diagnostic functions, including Battery Pack Detection, Tesla diagnosis, Reading ECU Information, Reading/Clear DTCs, Reading Live Data, and IMMO functions more than 45 special functions.
 
 

🥇2026 NEWEST XTOOL D9EV PROFESSIONAL DIAGNOSTIC TOOL FOR ENERGY VEHICLES

 
NEWEST AI-ASSISTED DIAGNOSTICS FUNCTION(NEW)
The AI ASSISTED OBD2 Scanner feature is available on the XTOOL D9EV after connecting to the internet and updating to V5.7.56-11.77 or later. After reading DTCs (fault codes), simply tap the AI icon under Diagnosis → More to receive fault explanations, step-by-step repair guidance, and structured diagnostic insights. Designed for beginner, DIY users and professionals, the AI feature helps simplify complex diagnostics. AI suggestions are for reference only and may vary by vehicle and fault code; always follow factory manuals and professional guidance.
 

HV SYSTEM DIAGNOSTICS & BATTERY PACK ANALYSIS

XTOOL Scanner D9EV can access into the HV system modules for EV vehicles to locate car faults by reading and clearing codes, live data. It also provides SOC, SOH, voltage, and temperature, etc. with one click battery pack analysis, help techs to monitor battery pack status. It also provides Jumper Connection Diagram with connecting options via Jumpers for your complete EV vehicle care.

 

ECU CODING & GUIDED FUNCTIONS

XTOOL D9EV ECU Coding tool can perform Offline Programming(PMI) For Ford, For Lincoln, For Mazda vehicles, to update ECU software/firmware, program new modules, etc. ECU coding and guided functions for VW/for Audi/ for Skoda to match, code the new ECU and customize car settings.

NOTE: ONLY available for specific vehicles among the mentioned makes.

 

INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSIS

XTOOL D9EV auto diagnostic scan tool with topology module mapping, allows to easily view the status between different modules and identify faulty modules quickly; only one click to check all fault codes, graphic live data. This feature significantly reduces guesswork during system scans, is beneficial for technicians to save time with 60% faster. Please note that this feature may not be available for all vehicles.

 

FULL BI-DIRECTIONAL CONTROLS/ACTIVE TEST

XTOOL D9EV auto diagnostic scan tool with topology module mapping, allows to easily view the status between different modules and identify faulty modules quickly; only one click to check all fault codes, graphic live data. This feature significantly reduces guesswork during system scans, is beneficial for technicians to save time with 60% faster. Please note that this feature may not be available for all vehicles.

 

45+ POPULAR SERVICES & ADVANCED CALIBRATION/INITIALIZATION

D9EV scanner for car performs 42+ comprehensive services including oil reset, EPB, SAS, Throttle, BMS, ABS Bleed, injector coding, key fobs programming, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Zero Point Calibration, Fuel Injector Balance, Language Change, Stop/Start Reset, A/F Reset, etc.
New Add Special Functions: Camshaft Learning, DPF split into DPF and GPF, Window Initialization split into Window Initialization and Sunroof Initialization.
Note: Please contact us with VIN to check compatibility.

 

SUPPORT FCA AUTOAUTH FUNCTIONS
XTOOL D9EV Automotive Diagnostic Scanner supports access to the Security Gateway Module on 2018 and For Fiat/Chrysler/Dodge/Alfa Romeo vehicles so that diagnostic tools can rede code, clear code, bi-directional control(active test), etc. (No Need FCA 12+8 Cable).
Note: The buyer is required to register an FCA account, any charges have nothing to do with the seller.
 

SUPPORT NEWEST DOIP AND CAN FD FUNCTIONS

D9 EV can works for the Doip protocol and CAN FD. CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)

 

WORK WITH ADD-ONS TO EXTEND CAPABILITIES

XTOOL D9EV professional automotive diagnostic tool can work on add-ons to further extend its capabilities, including professional key programmers (like KC100, KC501, KS1, KS2, M821), digital inspection camera(XV100), EEPROM adapter. NOTE: The add-ons above mentioned are not included. Please purchase separately.

 

3 YEARS FREE SOFTWARE UPDATE & 2 YEARS WARRANTY & 24/7 AFTER-SALE SERVICES

Comes with 3 YEARS FREE software updates, to get optimized features with One-click WIFI update; with 5 YEARS US warranty and 24/7 thoughtful after-sale service, provides you with reliable quality.

 

SUPPORTS 22 KINDS OF LANGUAGE

English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.

Note: If you cannot switch languages at will, please update the APP to the latest ('Diagnossis' APP>Setting>APP)

 
OPTIMIZED HIGH-END HARDWARE CONFIGURATIONS
The screen size of XTOOL D9 EV (9.7 inches) based on Android 10.0 is larger. One screen can display 15 data stream (Graphic and textual), which is easy to navigate. 6400mAh 7.2V rechargeable battery (up to 20 hours or more of battery life) to avoid frequent charging. 2GB+128GB ROM storage to save more vehicle documents and customer data. CPU processor updated been 1.8GHz eight-core to perform diagnostics quickly and efficiently.
 
 
🥇XTOOL D9EV NEWEST AI-ASSISTED DIAGNOSTICS FUNCTION
 
The AI-Assisted Diagnostics – Clear, Practical, and Easy to Use. The AI ASSISTED OBD2 Scanner feature is available on the XTOOL D9EV after connecting to the internet and updating to V5.7.56-11.77 or later. After reading DTCs (fault codes), simply tap the AI icon under Diagnosis → More to receive fault explanations, step-by-step repair guidance, and structured diagnostic insights. Designed for beginner, DIY users and professionals, the AI feature helps simplify complex diagnostics. AI suggestions are for reference only and may vary by vehicle and fault code; always follow factory manuals and professional guidance.
 
 

🥇QUICK ANALYSIS OF HIGH-VOLTAGE SYSTEM OF ENERGY VEHICLES

 

XTOOL D9EV is able to perform diagnosis on high-voltage (HV) system of new energy vehicles. Tap New Energy to enter the vehicle menu. The icon tagged on the vehicle makes indicates that the HV system can be diagnosed.

D9EV allows to you deeply check the battery working status with battery modules both installed in vehicle or out of vehicle. This helpful function shows each battery module's exact location, displays the State of Charge (SOC) and State of Health (SOH) of the battery pack, along with other important data such as voltage, current, and temperature for easy comprehension of complex EV battery information.

In most cases, HV system list appears on the main screen of HV System Diagnostics. Additionally, a System Block Diagram will be displayed for some new energy vehicles, such as For BMW, For Tesla, For BYD, For GM, For Audi, For Toyota, etc.

 
 

🥇SELLING POINTS OF XTOOL D9EV DIAGNOSTIC TOOL - AFFORDABLE AND EXCELLENT!

 

🔷Compressor Detection: This function supports the off-vehicle drive of the compressor module. After the compressor module is repaired, it does not need to be tested back on the vehicle. First, connect to the power supply according to the voltage identification on the compressor nameplate, and then connect to VCI according to the jumper diagram. By doing this, you can achieve one-key start of the compressor.

🔷OBC Detection: This function enables the off-vehicle drive of the OBC module. After the OBC module is repaired, it does not need to be tested back on the vehicle. First, connect the M812 box and VCI in series, and then connect the OBC and M812 box according to the jumper diagram. After connecting AC power and load to OBC, you can achieve one-key start of OBC.

🔷DCDC Detection: This function realizes the off-vehicle drive function of the DCDC module. After the DCDC module is repaired, it does not need to be tested back on the vehicle. After connecting to VCI according to the jumper diagram, you can achieve one-key start of DCDC.

🔷48V Motor Detection: This function allows you to do the off-vehicle drive for Audi’s 48V motor module. After the 48V motor is repaired, it does not need to be tested back on the vehicle. Just connect the power supply and then connect to VCI according to the jumper diagram. This way, you can achieve one-key start of the motor.

 
 

🥇ADVANCED ECU CODING(ONLINE CODING)FUNCTION

 

Used to reflash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements. You can use our XTOOL D9EV to stimulate all the possibilities of the vehicles.

After we replace control units, bad actuators, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Almost all systems that include engine, fuel, injector, gear shift, ABS, airbag system, and so on can be coded with this scanner. Before the coding, please read and record the original module’s information.

including: Recode Changed Modules; Optimize Vehicle Performance; Re-Flash Hidden Functions; Renew ECUs Coordination; Reprogram; Adaptive Data; Improve Fuel Efficiency; Reduce Power Loss; Improve the Durability of Mechanical Parts, etc.

 
 

🥇INTELLIGENT DIAGNOSIS OF ALL SYSTEMS WITH TOPOLOGY MAP FUNCTION

 

XTOOL D9 EV automotive diagnostic computer is capable of in-depth OE level diagnostics that is previously available to dealer-tool only. It can access and scan all available vehicle modules like ABS, SRS (Airbag), TCM, PCM, BCM, IMMO, Chassis, Suspension, parking brake system, HVAC, lighting system, Radio systems and etc to pinpoint fault locations for efficient car repair or component replacement, turn off warning lights and reset monitors.

🔷Read & Clear Codes: show DTC definitions, turn off Check Engine Light(MIL), ABS/ Airbag/ Transmission warning lights, reset monitors;

🔷Show 8 live Data Stream in 1 Text or Graph: like misfire data, engine rpm, transmission oil temperature, mass airflow sensor data, long/short fuel trim, fuel pressure, actual fuel temperature vs desired fuel temperature, cylinder balance rates and etc;- Retrieve freeze frame data to show the parameters when a DTC is recorded;

🔷Perform Active Tests: like EVAP test, idle relearn, injector test, ABS motor pump cycling, car window, doors, sunroof, wipers tests.

 

🥇INTELLIGENT TOPOLOGY MAPPING TO BOOST REPAIR EFFICIENCY BY 65%

 

XTOOL D9EV smart diagnostic tool features Module Topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules.

🔷Get diagnostic results in color coded modules at one glance

🔷Dive into the fault right on the tree mapping

🔷Prevent “false” fixes by considering all inter-connected modules to boost repair efficiency by 65%

 

Note: Module Topology for GM, for CHRYSLER, for JEEP, for DODGE, for FORD, for TOYOTA, for NISSAN, for HONDA, for BMW, for BENZ, for HYUNDAI, for MAZDA, ect.

 
 

🥇FULL BI-DIRECTIONAL CONTROL & VARIOUS ACTIVE TESTS AS YOU COMMAND

 

Command ECU to perform specific functions and tests by active tests, to check the working status of various systems and components without using the vehicle controls. Help you quickly find out the exact cause of the vehicle failure, thus saving diagnosis time!

🔷Fuel Injector Balance
🔷Cylinder Deactivation
🔷A/C Compressor Clutch Relay On/Off
🔷Cycling ABS Pump Motor
🔷EVAP Tests
🔷Switch on/off car wipers
🔷Rolling up/down windows
🔷Cooling fan motor command
🔷Interior lighting test
🔷High beam test

 
 

🥇45+ SPECIAL FUNCTIONS TO PERFORM COMPREHENSIVE VEHICLE SERVICE MAINTENANCE

 

Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.

EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively.

SAS Calibration: Erase fault SAS memories&  make calibration for Steering Angle Sensor.

BMS Reset: Register the newly replaced car battery into the car computer.

Gearbox Match: Matching the gearbox/transmission after replacement.

ABS Bleed:
Bleed the air out of the ABS system for firm brake pedals.

Key Programming:
Add new keys, disable lost keys, remote learning.

Injector Coding: Code the new injectors after replacement for accurate fuel injecting control and improve fuel efficiency.

 

Other special functions includes: Throttle Relearn, Suspension Calibration, Trans Adaptation(Gearbox Match), TPMS Reset, ABS Initialization, Seat Calibrations, Zero Point Calibration(of yaw rate sensor/ seat weight sensor, etc), Window/ Door/ Sunroof, Headlight Adjustment, Airbag Reset(airbag reset and clear airbag crash data), Idle Relearn, Power Balance, Transport Mode, Tire Upgrade, Tooth Learning, VGT Learn(VGT Turbo Calibration), Fuel Trim Reset, Fuel Alcohol Composition Reset, Air/Fuel Reset, Start/Stop Reset, Language Change, and continuously growing.

 

New Add Special Functions: Camshaft Learning, DPF split into DPF and GPF, Window Initialization split into Window Initialization and Sunroof Initialization.

 

Note: Special Functions vary across vehicle makes, models, year. Please come to us with VIN number to check compatibility before purchase.

 

🥇XTOOL D9EV SUPPORT POWERFUL KEY PROGRAMMING

 

The IMMO service can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN code/pin code calculation, Check number of keys, Generate key, Add key, All key lost

🔷Read Pin Code
🔷Generate key, Key Refresh
🔷Make Dealer Key
🔷All Key Lost
🔷Immobilizer Data Reading & Writing
🔷Backup IMMO Data
🔷Remote Frequency Detection
🔷Immobilizer Module Replacement
🔷IMMO ECU Reset & Coding
🔷Mercedes lnfrared Key Read/Write

 

Note: Not all cars support key programming. Please send the specific car model to the seller to check the compatibility before purchasing.

 
 

🥇XTOOL D9EV MORE ADDED FEATURES WITHOUT EXTRA COST

 

🔷BT Connection & Wired Connection: XTOOL D9EV offers BT connection feature to achieve remote diagnosis at a long range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the USB to Type B cable to achieve wired connection.

 

🔷FCA AUTOAUTH
:
XTOOL D9EV Automotive Diagnostic Scanner supports access to the Security Gateway Module on 2018 and For Fiat/Chrysler/Dodge/Alfa Romeo vehicles so that diagnostic tools can rede code, clear code, bi-directional control(active test), etc. (No Need FCA 12+8 Cable).

 
 
 

Note: The buyer is required to register an FCA account, any charges have nothing to do with the seller.

 

🔷Support CAN FD Protocol: Compatible More CAN FD Protocol Vehicles (For GM Vehicles After 2020) (CAN FD Adapter NO Needs Buy Separately)

🔷Support DOIP Protocol: DOIP Function Compatible For BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes.

🔷PRE SCAN: Can read the vehicle’s current fault codes and stored historical fault codes. These fault codes will provide initial clues to potential problems in the vehicle's systems. Help technicians and car owners understand the current health status of the vehicle and provide guidance for repairs.

🔷POST SCAN: After repair or maintenance is completed, use the diagnostic equipment to scan the vehicle again to ensure that all fault codes have been cleared and the vehicle system is normal. Make sure all issues are resolved, the vehicle is in top condition after repairs, and avoid hidden problems.

🔷Diagnostic Report 2.0: Report 2.0 allows you to customize shop and vehicle information, Try to add the customer's vehicle problem in the form of a picture to the report, and don't forget to put your shop logo in a prominent position in the report!!

🔷8 IN 1 Live Data Dispaly:
Reads, graphs and combines 8 independent streams of sensor data. Real-time data export to CSV file and data recording, playback, viewing. Allows you to export live data to a csv file for storage and comparison over time, or to view its graphical changes and textual readouts later.

🔷3 Years Free Update: 3 year free update, one-click update when the device is connected to the network, download the latest model, update the latest functions, and more functions are under development.

 

🔷Diagnostic Report 2.0: Report 2.0 allows you to customize shop and vehicle information, Try to add the customer's vehicle problem in the form of a picture to the report, and don't forget to put your shop logo in a prominent position in the report!!
- And more...

 
 

🥇COMPATIBLE WITH NEW ENERGY VEHICLES AND GASOLINE VEHICLES

 

Top Intelligent Scanner XTOOL D9EV DOIP/CAN FD protocols, Wider vehicle coverage for 99.99% makes in the market, which makes it compatible with oe factory tools to peform further services and programming. Covers more than 80 US domestic, Asian and European models, including supercar, light duty and some medium duty.

Battery Detection Support List: For AUDl, For BENTLEY, For BENZ, For BMW, For FAW-VOLKSWAGEN, For FORD, For GMEV, For HONDA, For HYUNDAI, For VOLKSWAGEN, For LAMBORGHINI, For LAND ROVER, For LEXUS, For LYNK & CO, For MAN, For MINI, For NISSAN, For OPEL, For PORSCHE, For PROMISE, For RENAULT, For SAIC VOLKSWAGEN, For SEANEV, For SEAT, For SKODA, For SMART, For SUZUKI, For TOYOTA, For VOLVO, For VW CV

Energy Vehicle Coverage: For ACURA, For AUDI, For BENTLEY, For BENZ, For BMW, For BYD, For CHERY, For CITROEN, For DACIA, For VW, For DFCITROEN, For DFPEUGEOT, For GM, For GQcQ, For HONDA, For HYUNDAl, For INFINITI, For JAC, For JAGUAR, For YQAUDI, For JILl, For KlA, For LANDROVER, For LEXUS, For LIFAN, For LYNKCO, For MIT, For NISSAN, For OPEL, For YQVW, For PEUGEOT, For PORSCHE, For RENAULT, For SHvw, For SMART, For TOYOTA, For BENZ, For TRANSPORTER, For USAFORD, For VOLVO.

Gasoline Vehicle Coverage: For DEMO, for VW, for MINI, for LAND ROVER, for SEAT, for FERRARI, for FORD, for OPEL, for ALFA for ROMEO, for VOLVO, for DEMO, for GM, for FORD, for CADILLAC, for CHEVROLET, for GMC, for HUMMER, for JEEP, for Demo, for TOYOTA -LEXUS, for ISUZU, for MAZDA, for KIA, for INFINITI, for ACURA, for NISSAN, for Demo, for Ford and more...

 
 
🥇XTOOL D9EV COVER 22 MENU LANGUAGES
The device can support any 3 languages at the same time, you can choose:
 
English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.
 
STEPS ON SET THE LANGUAGE
 
1. Activate the device with email
 
2. Switch language in settings ('Diagnossis' APP>Setting>Language)
 
3.Click 'Updates' In Device
 
4. Supports 3 languages at the same time and can be switched at will
 

Note: If you cannot switch languages at will, please update the APP to the latest ('Diagnossis' APP>Setting>APP)

 
 
🥇XTOOL D9EV ADVANCE HARDWARE CONFIGURATION
 

Operating System: Android 10
Processor: Rock chip 4 Core 1.80GHz
Memory: 2G RAM, 128 ROM
Display: 9.7 inch 1024×768P resolution
Communication Method: BT 4.2 | WIFI 2.4/5G
Connectivity: DB15 TO VAG | USB 3.0
Camera: 8.0 Megapixel
Battery: 6400mAh, 7.2V
Working Voltage: 3.6 to 4.2V
Power Voltage: DC 12V

Recently viewed products

Related products