Ancel V6 Full Systems Diagnosis

To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel system if vehicle want start or check engine light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you cant see clearly;

To diagnose Light

25 Kinds of Special Reset Service Functions

Comprehensive automotive scan tools with multiple reset functions have become a market trend. Other diagnostic tools that cost about the same typically include only a few or 10+ service reset functions, are limited in their capabilities and expensive. The upgraded V6 PRO+ professional diagnostic tool has 25+ services that allow you to do your own repairs efficiently and easily, and is definitely the most cost-effective diagnostic scanner on the market. Here are some of the most popular services:

1. Oil Reset: When the service lamp on the instrument cluster is up, changed the oil, then turn off the oil light and reset the service mileage.

2. ABS Bleeding: When the ABS contains air, the ABS bleeding function is required to bleed the brake system to get a firm brake pad.

3. EPB Reset: It performs the maintenance of electronic parking brake systems. The brake pad reset is required to turn the MIL off after replace the brake pad.

4. Key Calibration: It supports add the new key and remotely disable the lost one when the key was lost to prevent your car from being stolen.

5. BMS Reset: When the battery shows aging or damage, need to re-match and registering the battery, then clear the fault codes from the dashboard and reset BMS module.

6. DPF Regeneration: The diesel filter will become clogged after a long time. Once the engine recognizes the DPF clogging, it will trigger regeneration. This function performs diesel filter cleaning to clear the blockage and reset the DPF light.

7. Injector Coding: Write the new injector code to the ECU after replacement of injector so that the cylinder can identify the new injectors to lower fuel emissions.

8. SAS Calibration: The steering angle sensor is used to detect the rotation angle of the steering wheel. This function performs calibration for the steering angle sensor to clear fault memories of the steering angle sensor.

9. Throttle Adaptation: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position is necessary to precisely adjust the throttle opening.

10. TPMS Reset: The tire pressure monitoring system can perform real-time automatic monitoring of various tire conditions. When the tire pressure is insufficient, need to perform tire pressure reset after replace the tire or sensors.

11. AT Set/Gearbox Matching: Perform complete the self-learning of the gearbox and improve the quality of shifting. After the gearbox is disassembled or repaired, it will cause problems such as shift delay. At this time, this function needs to be executed to make the gearbox automatically compensate according to the driving conditions to achieve a more ideal shift quality.

12. Gear Learning: In the case of replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, or shows fault codes "tooth not learned", tooth learning must be performed.

13. Suspension Calibration: This function can adjust the height of the vehicle. The following situations need to perform this function to adjust the vehicle height sensor for calibration: 1. After replacing the vehicle height sensor or control module in the air suspension system. 2. When the level of the car is wrong.

..........

Note: The above list is only a small part of all supported services, many more are not listed. Also note that not all services and special features are universally compatible. Please send us the VIN number and the functions you need to check compatibility.