ANCEL BZ700 OBD2 Code Reader Professional for Mercedes for Benz All System ABS
MANUFACTURE-LEVEL DIAGNOSTICS FOR MERCEDES BENZ: You want to keep driving it as long as you can, right? There are few things your BENZ will require of you to maintain its longevity then — changing your oil, replace electric brake pads, and throttle relearn tasks. But one thing that does the most to ensure your car will run smoothly is taking care of your BENZ’s battery. The BZ700 registers the battery and checks the battery voltage to ensure your car doesn't break down on the road.
MANUFACTURER-LEVEL DIAGNOSTICS FOR MERCEDES -BENZ VEHICLE
Transmission adaptation : This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
Battery Registration : To put it simply, battery registration is a process of updating your vehicle with information that a brand new battery has been installed in your car.
Battery Voltage Test : Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
Throttle Relearn : Relearns the throttle valve control value while clear or replaces the throttle value.
ABS Bleeding : Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
TPMS Reset : Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.
EPB Reset : System maintenance deactivates and reactivates the EPB system for replacement and initialization.
SAS Reset : Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor. After calibrate sensor successfully, its fault memory will be automatically cleared.
Oil light Service Reset : Support service lamp reset, reset service mileage and service intervals.
FULL OBD LEVEL DIAGNOSTICS FOR ALL VEHICLE BRANDS
Read/Erase Codes : Read the fault code within 3 seconds and clear the pending fault code, and turn off the engine light.
Live Data Stream : Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.
Smog Check :The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. Determine if your vehicle is ready for a smog test.
Evap System Test : The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Vehicle Information : The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
Ancel BZ700 OBD2 Scanner Vehicle Testing Coverage list:
Support all For Mercedes Benz/Sprinter/Smart with OBD2 interface 16PIN from 2000 to 2022.
Can't support 38PIN (107(1971-1989), 124(E Class 1984-1994)，129(SL Class 1989-2001)，126(S Class 1979-1991),140(S Class 1991-1998), 170(SLK Class 1996-2004),201(190 1982-1993)，202(C Class 1993-2000),208(Up to 2002), 210(E Class 1995-2002), 461(G Class)，463(G Class 1990-)
PRODUCT DESCRIPTION
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
1*BZ700 OBD2 Scanner
1*Data Line
1*User's Manual
