LAUNCH X431 Creader 5011 V2 TPMS Tool，TPMS Sensor (315+433MHz) Read/Activate/Relearn/Reset Scanner Tool,OBD2 Code Reader& 12 Hot Rests, Lifetime Free Update
Key Reason to choose LAUNCH TPMS CRT5011 V2.0
1. Supports 99% Vehicle Coverage with TPMS-equipped system
2. All 315/433 MHZ Sensors,100% activated
3. OE Inquiry , Input OE sensor part# for TPMS sensors activation and programming
4. Unlimited Programming, Program LAUNCH sensors for unlimited time to replace OE sensors
5. Relearn Sensors ,Matching & learning via OBD connection with step-by-step instructions in the APP
6. TPMS System Diagnosis ,Reading/Clearing TPMS fault codes
7. OBD II Scan,OBDII/EOBD functions included
8. Software Update via WIFI , Lifetime free
9. Real-time Display ,Tire pressure, temperature, battery status, etc
10. Instant Sharing, Supports sharing and playback of diagnostic reports, feedback, and screenshots
11. Add-on Module, Works with the Thread Master
Activate Sensors
Activate 99% & 315MHz/ 433MHz Sensors
LAUNCH Creader TPMS 5011 V2 can easily activate most of OEM 315/433MHz TPMS sensors on the market,Reading/copy/writing sensor ID value,Allow you to check and view the detailed TPMS sensor relearning program. Their learning operation is only applicable when the newly programmed sensor ID is different from the original sensor ID stored in the vehicle ECU. Relearn is used to write the newly programmed sensor ID into the vehicle's ECU for sensor recognition. You can check the OE number of the original sensor. TPMS 5011 V2 have three relearn methods:OBD Relearn,Automatic Relearn,Stationary Relearn.
OBD Relearn: Write TPMS sensor id to TPMS module through OBD connector.
Automatic Relearn: Complete by driving.
Stationary Relearn: placed in the "Learn Mode".
Unlimited Repeat Programming
LAUNCH Creader TPMS 5011 V2 programs sensor data to LAUNCH sensors and replaces sensors that have low batteries or are not functioning properly. It can program up to 8 LAUNCH sensors simultaneously.LAUNCH Creader TPMS 5011 V2 can work with LAUNCH LTR-01/03 Sensor.
>>3 Modes to Program LAUNCH SENSOR
Manually create can manually enter the original ID.
Automatic creation the system automatically generates ID.
Copy ID copy the old sensor ID to the LAUNCH SENSOR if the old sensor can still be activated.
TPMS Diagnose
LAUNCH Creader TPMS 5011 V2 can help you to diagnose the TPMS system, read and clear the TPMS dtc, view the detailed description of the dtc, and check the status of all TPMS sensors.
12 SERVICES FUNCTIONS, Meet 99% Maintenance Needs, Increase Efficiency and Save Time and Money!!!
LAUNCH X431 Creader TPMS 5011 V2 is equipped with 12 OBDII functions.this TPMS tool performs OBDII-assisted relearn, communicates with the vehicle via the OBDI cable, triggers the wheel-mounted sensors, writes the sensor IDs directly to the vehicle's ECU for sensor recognition, and completes the sensor duplication in a snap.
Oil Reset - After completing the oil change, reset the oil change telltale light in order to restart the vehicle's mileage calculation.
Brake Reset - After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light
Battery Matching - evaluates battery charge status,recalibrates the vehicle's electrical system to recognize a new or replacement battery and optimize its performance.
SAS Reset - Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
ABS Bleeding- When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
Throttle Reset- ensure smooth throttle response after maintenance or component replacement.
D-P-F Regeneration- Clear PM (Particulate Matter) from the D.P.F filter through continuous combustion oxidation mode to stabilize the filter performance.
TPMS Service- When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.
Injector Coding - Write new injector codes into the car system to get the correct cylinder injection amount.
Sunroof Reset- Resetting the sunroof control unit can improve overall v-ehicle functionality.
Seat Calibration - Sets the initial position and functions of the seats after adjustments or replacements.
Windows Calibration- adjusts the position and function of windows to ensure proper operation and alignment.
If you have any questions, please reach us via ediagtools @ hotmail. com, for assistance.
LAUNCH TPMS CRT5011 parameters
■ Screen size: 5 inches, 720*1280
■ Equipment size:211.5*99*34.5 mm
■ OBD II interface input voltage: 9~18V
■ Battery capacity: 6000mAh
■ WIFI:2.4G hz
■ Package size:175*215*76 (mm)
■Main line length: about 117cm
■ USB length: TYPE C interface
■ Storage size: 2+32GB
■ Working temperature: 0℃-45℃
■Storage temperature: -20℃-+70℃
■ Upgrade method: wifi upgrade
