Suitable For TOYOTA Prado 120 Complete Transponder Remote Key 304MHz Chip 60120

2 sold in last 8 hours

In stock

$55.99

Default Title

Quantity:

Subtotal: $55.99

Add to Wish List

11 customers are viewing this product

Suitable For TOYOTA Prado 120 Complete Transponder Remote Key 304MHz Chip 60120

PRODUCT HIGHLIGHTS

BRAND NEW
HIGH QUALITY
1 YEAR WARRANTY
MADE BY TOP AFTER-MARKET MANUFACTURE
QUALITY GUARANTEED


MODEL	SUITABLE FOR PRADO 120 09/2002 TO 08/2004
REMOTE FREQUENCY	304MHZ
BUTTONS	2
BLADE
TRANSPONDER CIRCUIT / CHIP	4D-67
BATTERY	INCLUDED

Note: This is a complete remote key which includes Transponder and battery. Key will need to be cut and programmed.

Note: To check this is correct key for your car you can pop open your existing key case cover and check number stamped be on remote part number should be "60190" and "60120" & "60170"

Remote Programming:

STEP1. Open Driver side door

STEP 2. Put the Original key in and out of ignition for 2 times

STEP 3. Close and open driver door for 2 times

STEP 4. Original Key in and out for once

STEP 5. Shut and open door for twice

STEP 6. Close door

STEP 7. Put Original Key in the ignition and Turn ignition on

STEP 8. Turn ignition off and remove key

STEP 9. Door locks will cycle

STEP 10. Do the following for all remotes:

Press lock and unlock together for 1s, then press the lock button

STEP 11. Locks will cycle put key in ignition turn to on then off

STEP 12. Remove key from ignition, close door and test remote

To Delete All Remotes from the Vehicle

At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

Program keys

STEP 1. Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)

STEP 2. Open and shut door for 6 times

STEP 3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition

STEP 4. Leave for 60s (or til light goes out)

STEP 5. After 60s security light stops flashing then you can start car.

STEP 6. Take key out

STEP 7. Open and shut door

If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again.

PACKAGE CONTENT: