Main features:

4G LTE+3G WCDMA+2G GSM networks:

1.54” LCD touch screen (240*240pdi)

GPS positioning, with accuracy of 5m outdoors

WIFI positioning, with accuracy of 30m indoors

Health management with HR&BP, Pill reminder and Step counting

Remove alarm

Waterproof IP67

Web platform/ Phone App/ SMS for positions check

SOS call, Voice call, Voice chat

Geo-fence: GPS fence & WIFI fence double care

High pixel camera

Talking clock monitor

Low battery alarm

Ringtone to find people

Product specification：

Bands combination ( Blobal 4G network coverage):

4G-FDD： Band 1/2/3/4/5/7/8/12/20/28A

3G-WCDMA：Band 1/2/5/8

2G-GSM： Band 2/3/5/8

GPS locating time：30sec with cold boot (open sky)

　　 29sec with warm boot (open sky)

　　 5sec with hot boot (open sky)

GPS positioning accuracy：5-15m (open sky)

WIFI positioning accuracy：15-100m(Under WIFI range）

Working temperature：-10℃ ~ +80℃

Working humidity：5% ~ 95% RH

Host size: 58.2(L)*40.8(W)*17.2(H)mm

Host Net weight: 41g

Battery:600mAh

Package Including:

1pc GPS Tracking Watch

1pc USB Charging Cable

1pc Screw driver

1pc User Manual

2pc Spare Screws

1pc SIM Card Ejector Pin

FAQ：

​Q: Device shows online, but it shows “wait for the device responses” when you make settings with APP.

A: a. Device SIM signal is not good with poor GPRS data;

b. Device is busy in other process. Please wait a minute and try again.

Q: After inserting a SIM card, it can get a SMS reply, but it displays “Not enabled” on the platform and APP.

A: Please check the watch SIM Card has LTE data plan.

Q: The SIM card has 4G data plan, but the device still shows “Not enabled “or “offline”.

A: It needs to configure APN data, since we have pre-programmed most SIM cards’ APN, but hasn’t. Find out your watch SIM card’s APN name, APN user name, password, MCC and MNC codes before doing below settings.

Please set main monitoring number first by sending below command from your own phone to the watch sim number.

pw,123456,center,your own phone number#

After a reply, send below command to set APN into the watch.

The command is: apn,apndata,user,password,MCC MNC code#