This XTOOL TPMS diagnostic tool TP150 can access the vehicle TPMS system to probe the issue like read codes, pinpoint the fault cause, clear codes and reset the TPMS light, assists to enhance the tire performance and maintain tire health.

➤Read & Clear TPMS DTCs: Read and clear TPMS fault co*des, and turns off the TPMS warning light.

➤TPMS Reset & Relearn: Reset the TPMS after accurate diagnosis and issue located and solved.

➤Record & Check Latest Test: Latest tested vehicle and operations can be remembered, and it helps to lead to the same vehicle for activating sensors faster.

4 Ways to Program XTOOL TS100 Sensors When Replacing OE Sensors Is Needed

XTOOL TP150 TPMS Programming Tool provides 4 convenient and easy to use options to program XTOOL sensors(Durable for 3-5 years, the substitution of expensive OEM sensors) to replace broken sensors and meet the specifications of a particular vehicle before new sensor installation and relearn.

➤Automatic ID Generation: Automatically create a new unique ID(s) into TS100 sensors. After programming the TS100, you need to perform tpms relearn to match the new sensor ID to vehicle's ECU. If you don't know the original sensor ID or your original sensor was bad, you could choose this method.

➤Manual Input ID: Input the ID manually into the new installed TS100 sensor. You can find the ID on the original sensor. If you know the original sensor ID(the original sensor cannot be activated) and the tire/sensor position has not been changed, you could choose this method.

➤Copy ID by Activation: Trigger the original sensor, get the ID and and copy the ID to the new sensor. If your original sensor works and can be activated, and the tire/sensor position has not been changed, you can choose this method.

➤Copy ID by OBD: Diagnose the vehicle TPMS and get the ID, copy it to the new sensor. If your original sensor is missing and the ID can be read after diagnosis on the car, and the tire/sensor position has not been changed, you can choose this method.

Note:

TPMS programming only work with XTOOL TS100 sensors. 

TS100 sensors are not included in the tool kit!

Relearn is needed for Method 1; relearn is no need for Method 2,3,4.

As for method 2,3,4, please note that the damaged OE sensors should not be placed on the vehicle while programming, as they can cause data interference.