2023 Upgraded Version XTOOL D7 ALL-IN-ONE Service Tool, Cost effective Purchase,Best Choice on Aliexpress!!!

✔Buying with 3-Year Software Free Update (Value $300) & Lifetime Perfessional Technical Service

Most scanner in the market within same price range comes only 1 year update, XTOOL D7 scanner comes 3 years free software update. You can added car models coverage, improve performance and capabilities within its fold for 3 years. You can still use the scanner normally even when the free updates period expires.

✔ 36+ Advanced Maintenance Services，Over 10 Kinds of Advanced Functions New Added: (Available above APP V4.27.4)

Covers all common maintenance functions like Oil Reset, ABS Bleeding, Injector coding, Fuel Trim Learn, Transmisson Reset, Language Change, A/F Settings, Stop/Start Reset, SAS Reset, TPMS Reset
New added in 2023:
HVAC Control Module Calibrate, Hybrid Control Compression Test, Language change, A/F Settings, Stop/Start Reset, Air Suspension, Headlight, Transport Mode, Tire Upgrade, Crankshaft Position Sensor learning, Zero Point Calibration, SWS Calibration, Yaw Rate Sensor calibration, Fuel Trim Reset, Fuel Alcohol Composition Reset, Air/Fuel Reset, EVAP Test, Idle learn Reset, etc. more functions are still under development……

✔ Key Programming Function(Every Workshop Needed)

Disable a lost vehicle key and program the replacement key fob for specific vehicles.Note: Check the key type with us before buying.

✔ OE-Level Full Systems Diagnostics

D7 auto scanner with complete capabilities for read & clean codes, live data, active test, ECU information, adaptation, matching, etc. Powerful OE level diagnostics for more than 80 US, Asian and European makes and models.

✔ Enhanced Bi-directional Control(Active Test):

Perform various active tests to check the integrity of systems or components and the operating conditions of various car systems or sub-systems without using the vehicle controls to test ABS motor, window, door, solenoids, relay, switch, valves, sunroof, headlamps and etc to check its functionality.

✔ 8-In-1 Graphing,More Comprehensive Live Data

The original 4-in-1 graph is changed into 8-in-1 graph,Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one graph.

✔PDF Diagnostic Report & Remote Suppport

D7 auto diagnostic scan tool enables diagnostic tech or mechanics to generate history diagnostic reports for sharing with customers by printing it out or sending it to customers via PDF.If you encounter problems and are not able to solve them, you could come to us to reserve remote assistance from XTOOL TECH TEAM.

✔Upgraded Android 10.0 OS,7-inch LED capacitive screen with 1024×600 resolution.

The 2023 new version of D7 has been upgraded the Android 10 operating system, bringing you a faster, smoother and more consistent experience.

✔ Wider Coverage for More Vehicles(still expanding in 2023)

Add more models in 2021 and 2022, expand to 140+Brands, and 10000+Models for EU,ASIA,US domestic cars to perform OE level diagnostics，Active test... XTOOL technical team is still adding new models.

D7S New More Functions ECU Coding

For customize your car, unfold the hidden features, or disable the annoying functions(turn off the back up beep, turn the seat belt buzzer off); Re-identify the adaptive data for certain components after repairs or replacements Works For VW/AUDI/SKODA

D7 Newest more Update

D7 Tablets been 2G+32G ROM               D7S Update For 2+64G ROM

D7S now support for the can fd and Doip

>>>OE-LEVEL Full System Diagnostic Scanner Tool,Professional Tool for Auto Mechanic

XTOOL D7 is an full system diagnostic scanner as it can scan all available systems of car to read and clear codes, view live data stream of various sensors and graph it, retrieves freeze frame, perform active tests to check the work status of modules, providing you with a Dealership-Level only diagnosis, getting the accurate and in-depth diagnosis across all automotive systems.
Include : ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System ,Oil Service System , SRS System ,DPF System ，Air Conditioning System，Transmission System, etc...

>>>Active Test / Bi-directional Scan Tool

XTOOL D7 is a bi-directional scan tool, allow you to request information or command a module to perform specific tests and functions, while observing the resulting data to troubleshoot and fast repair. Bi-directional Control (also referred to as Active Tests/Component Tests) function can save the mechanic/workshop loads of time and help them get through more jobs every day.
D7 can perfrom EVAP Test, Fuel Trim Reset, Fuel Composition Reset, Injector Buzz Test, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, etc.

Advanced ECU Coding

>>>Best Choice for Technician & Advance DIYers & Garage & Auto repair shop & Car dealer>>>
✔ Advanced ECU Coding:

ECU coding capability for VW/AUDI/SKODA ONLY which performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

✔ Flash Hidden Functions(ECU Configuration) for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Modify personalization/customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob, etc.

>>>36+ Hot Service Functions Accessible for Complete Car Maintenance[Continuously Updates......],Save You Tons of Money!

1.Oil/Service/Maintenance Light Reset: Close the oil service light and reset service mileage & service interval after replacing the engine oil.

2.EPB Reset：Reset the new electronic parking brake for braking wheels safely again.

3.Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

4.TPMS Reset: Relearn TPMS sensors so that new sensors can be recognized by ECU.

5.ABS Bleeding: Get a firm brake pad after air exhaustion.

6.Immobilizer: Allows to disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

7.DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

8.Injector Coding: Code the new injectors after replacement for accurate fuel injecting control and improve fuel efficiency.

9.SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.

10.BMS Reset: Register the newly replaced car battery into the ECU.

11.Window Initialization, Gearbox Match, Instrument Cluster, Headlight, Air Suspension, Gear Learning, EEPROM Adapter, Airbag Repair, Cylinder, Seat Configurations, Electronic Pump Activation, Disabled Transportation, Performance Tire Upgrade, A/F Setting, Stop/Start Reset, Language Change and Reset Control Unit, Rain/Light Sensor, A/C Relearn, HV Battery, VGT Relearn, FRM Reset, EGR Relearn, SRS, Clutch Adaptation, Speed Limit etc…

More...

2023 Newest Add Functions(Available above APP V4.27.4):

HVAC Control Module Calibrate, Hybrid Control Compression Test, Language change, A/F Settings, Stop/Start Reset, Air Suspension, Headlight, Transport Mode, Tire Upgrade, Crankshaft Position Sensor learning, Zero Point Calibration, Fuel Trim Reset, Fuel Alcohol Composition Reset, Air/Fuel Reset, EVAP Test, Idle learn Reset, Reset Control Unit, etc.

>>>More Enhanced Functions on D7 That Every Workshop needed.

IMMO Key Programming Functions:

Disable a lost vehicle key and program the replacement key fob for specific vehicles.Note: Check the key type with us before buying.

Auto VIN SCAN for Quick Diagnosis:

D7 diagnostic tool will start auto-detected process and you can scan your car’s detailed version information with one click. You can always navigate your vehicle manually to perform diagnostics if the AuoVIN do not work in some cases.

8 IN 1 Live Data Graphing Functions:

D7 can diagnostic all trouble codes and live data stream of full electrical control units and view Freeze Frame.Display live data stream in text or graphs like cylinder misfires data, transmission fluid/Oil temperature, fuel trim, ATF temperature, cylinder balance rates, engine rpm, O2 sensors, mass air flow sensor data, fuel pressure, actual fuel temperature vs desired fuel temperature and etc;

(New Added)Export Live Data as CSV: Exporting live data as CSV file to track vehicle performance over time.
(New Added)8-In-1 Graphing: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one graph.
(New Added)Graph up to 8 sensors individually on the same screen.

One-click Online Update:

Just connect to the network, you can enjoy updates anytime and anywhere throughout the year, download the latest models, update the latest functions, and avoid the complex update mode of USB connection!

>>> 15 idiomas suportados, sem barreiras idiomas mais!

XTOOL D7 tem opções do menu 15 idiomas, mas o padrão em Inglês. Se você quiser alterar o idioma para espanhol, alemão, francês, italiano, finlandês, árabe, japonês, coreano, polonês, português, vietnamita, russo, chinês simplificado e chinês tradicional etc. Gentilmente venha até nós com o S/N.

>>>15 Languages Supported,No Languages Barrier Anymore!

XTOOL D7 has 15 languages menu options,but default in English. If you want to change the language to Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese etc. Kindly come to us with the S/N.

>>>How to Change the Language?

Step 1. Leave a Message about your SN and tell us what Language you need.Q: Where is the SN?
Step 2. "Settings"-> "Language"-->Choose Language
Step 3. "Settings"-->”System settings”-> Language & input -->Choose Language
Step 4. Reboot and Ready to Update,Click to Update,Download Software

>>>Packing List

D7 Smart Diagnostic Tablet * 1
VGA Main Cable * 1
OBD II-16 Connecter * 1
Micro USB Cable * 1
Charger for Tablet * 1
EU Charger Adapter * 1
US Charger Adapter * 1
User Manual * 1

>>> D7 Parameter

Operating System：Android 10.0 O.S.
Display：7.0 inch touch screen with 1024 X 600 resolution
Power and Battery：4000mAh, 3.7V
Memory：2GB+32GB--- D7S BEEN 2GB+64GB
Power Consumption：8W
Power Voltage：5V
Processor：Quad-core 1.6GHz ProcessorConnectivity：Micro USB+WIFI(2.4Ghz & 5Ghz)
Dimension (L*W*H)：218*150*29mm
Sensors：Gravity sensor, light sensor