LAUNCH OBD2 Scanner CRP919E 2023 Full System 7 Inch Automotive Diagnostic Tools
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
1.Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicleâs on-board computer.
8.On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems
9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
2023 New Launch CRP919E
Launch CRP919E is most cost-effective and best-selling automotive advanced diagnostic tool.
The performance of CRP919E is similar to X131 V, but the price is half of X431 V.
Selling point:
1.All system diagnosis: including Engine,Transmission, ABS, SRS, TPMS, EPB,Body System,Battery,ESP, IMMO etc.
2.Full OBD2 Functions: read car module informa,read and clear fault code.....
3. OE-level advanced diagnosisï¼ ECU offline/online coding, Bi-Directional Test(active test), Refresh Hidden .....
4. CAN FD & DOIP Protocols+ FCA AutoAuth access
5. Supports 31 Reset Service:
includes Oil reset, A/F Reset.......
6. Lifetime free to use + 2 years free update+ 5 years warranty.
7. Other functions:
Auto VIN scan, Share & Print Diagnostic Report,4-in-1 Live Data in Graphic .
What is the difference with the CRP919E and CRP919E BT ??
CRP919E BT is a new generation of 7-inch automotive intelligent diagnostic equipment with high configuration and super performance. The host is developed based on Android 10.0 system, adopts 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery to make diagnosis faster, more stable and more durable; the products inherit the functions and advantages of CRP 919 products, and expand the memory And storage size, equipped with the latest CarVII Bluetooth diagnostic connector, to give customers a better user experience
All System Diagnosis:
LAUNCH CRP919E support read/clear DTCs, read live data stream and perform active test and services functions for ALL modules of cars&Trucks including Engine system/SRS system/Retarder system/Transmission system/CAB Climate system/Unit Pump system/Electronical control system/Tail gas after-treatment system/Body system/ABS(anti-lock brake system)/Instrument System/Brake control system/Suspension system/Common Rail System/Natural gas system...etc.
Bi-directional control :
Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators .For example , x431 v have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it will actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. even open an e.g.r. valve and seeing the difference in idle response and oxygen sensor voltage. Please note: Active tests are NOT universal for all vehicles, check compatibility with VIN number before purchase. Active tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.
Here are some other examples of active tests, which help you locate faults in the shortest time, saving time on troubleshooting:
Injector Buzz Test;
Fuel Pump & Valve Tests;
A/C Compressorclutch Activation;
Turn the Wipers ON/OFF;
Modulate Throttle ON/OFF;
Acceleration Device Test;
31 Reset Service:
1. A/F Reset
2. Brake Reset
3. Oil Reset
4. SAS Reset
5. Battery Reset
6. ABS Bleeding
7. Electric Throttle Relearn
8. TPMS Reset
9. Diesel Particulate Filter Regeneration
10. EGR Adaption
11. Air Conditioning System Relearn / Initialization
12. Adblue Reset
13. AFS Reset
14. Coolant Bleed
15. Engine Power Balance Monitoring
16. Gear Learn
17. Gearbox Learn
18. High Voltage Battery Diagnostics
19. IMMO
20. InjectorCoding
21. Language Change
22. NOX Sensor Reset
23. Seats Calibration
24. Stop/Start Reset
25. Sunroof
26. SUS Reset
27. Transport Mode
28. Type Reset
29. Windows Calibration
30. Intelligent Cruise Control System Reset
31. Gas Particulate Filter Regeneration
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
1.Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicleâs on-board computer.
8.On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems
9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
